View Product Literature Advance 6-inch, heat-treated die clamps are rated at or above 135,000 psi tensile strength. Advance 4-inch die clamps are rated at or above 85,000 psi tensile strength.

Features:

• Closed slot design. The clamp can’t slip off bolt and forces the bolt to be in only one place closest to the die for maximum holding power.
• Straight-line parallel clamping. Puts pressure where it is needed.
• Accessory T-bolts, washers, and flanged nuts. Forged and machined from superior grade steel.
• Easy identification and height rise are cast into back of clamp for easy reordering.

Instructions for Proper Use of Advance Die Clamps

• Select clamp for proper die clamping slot rise.
• Locate die clamp so that the maximum clamping surface is in the die-clamping slot.
• Locate the T-bolt as close to the die as possible.
• Torque the bolts tight.

DO NOT over-tighten the die!